Sprout11

Back in May, I was invited by my neighbors from Sprout Patterns to take a tour of the Spoonflower HQ, right next to where I live in North Carolina. If you don’t know Spoonflower yet, it is the leading company for on-demand printed fabric. Their website lets you pick a fabric quality and print your own design, or choose one in their gigantic design library. Sprout Patterns is one of the new services they offer, which launched last year. Its concept: combining the fabric printing capabilities of Spoonflower with a curated selection of indie patterns to offer customized sewing project kits. These come in the form of fabric yardage with pre-printed pattern pieces, that you just have to cut along the lines. At first I had mixed feelings about this idea. On the one side, I am generally skeptical about pre-cut fabric or patterns, such asΒ the kits offered by the French company Eglantine et ZoΓ© or the iron-on patterns from Made in Me Couture, as they prevent from making any sort of adjustments. On the other hand, I am super passionate about the intersection of sewing and technology (3D garment modeling, automated print/pattern/cutting layout generation, etc.). I was thus very curious to try their product first-hand, so when Nicole and Caroline offered to send me a project to review for free, I said yes!

Sprout16

But first of all, let’s throwback to a couple decades ago. When I was 8, my brother, my sister and I got our own computer, and with it my very first CD-Rom: Barbie Fashion Designer. With Barbie Fashion Designer, you could pick clothing patterns, choose prints and add colors to create Barbie’s wardrobe. Once you had designed a garment, you could see Barbie model it in 3D, and print the pattern on a special woven fabric. Then you just had to cut the pieces (which were printed on a white background) and assemble them using glue and velcro straps and you could make clothes that Barbie could actually wear!

Barbie Styliste French Version - Cover

Well let’s say that Sprout Patterns is basically a reboot of Barbie Fashion Designer where you are Barbie and you print your garment on actual fabric πŸ˜‰ .

 

CHOOSING A PROJECT

You start by creating a project, composed of three elements: the pattern, the fabric, and the design.

Available patterns include both designs by new pattern creators launching their brands, and staples of the indie community (Colette, Grainline, Named…). The common thread is that all of these patterns are easy to fit: either they are made from knits, or they have a loose, relaxed cut that requires no fit adjustments. No structured and fit-and-flare dresses here! I picked the Zeena dress from By Hand London, which was the closest to my usual silhouettes. I didn’t really care for this pattern when it came out: I think the pink sample really missed the mark, as it looks way too big for the model. The pretty Zeenas made by Fiona of Diary of a Chain Stitcher in voileΒ and double gauze me reconsider, and convinced me to try one more BHL pattern.

Sprout1

After selecting the pattern, you need to pick a fabric type. Instead of letting you choose any of the available Spoonflower qualities, Sprout Patterns offers a pre-selection of fabrics that would work with each pattern. For Zeena, I could go with different cottons (batiste, sateen…) or with polyester faille or crepe de chine. I picked the poly crepe the chine: I already had a sample of it and it is beautiful, very soft and light.

Sprout14

Choosing the print is much harder: the Spoonflower design library is huge! To make things easier, Sprout Patterns implemented a design palette system that lets youΒ search designs using various criteria (designer, theme, colors…) and save them for later. I really wanted a toile de Jouy dress, and I figured I could take advantage of the Sprout system to use a different design on the top and skirt parts of the dress:Β Dr WhoΒ on top, and Star Trek on the bottom. But Nicole had warned me that designs with a white background could be pretty transparent of certain fabric qualities, and after checking the samples I realized that it would be the case for the poly crepe de chine. Zeena’s facings would have shown through, and I didn’t want to have to buy extra fabric to line the dress entirely. I moved on to plan B: a flamingo print (apparently I am still obsessed!) by Andrea Lauren, Spoonflower’s most prolific and popular designer.

The website lets you move the print around on the cutting layout, which updates a 3D rendering of the project. For those of you who are as curious about the technology as I am:Β the 3D model for each patternΒ is created by hand by Nicole. I had heard about a research team who proposed a few years ago a system to generate automatically 3D models from Burdastyle patterns (the video is worth watching if you are not turned off by the monotonous tone of research presentations πŸ˜‰ ), but this is still very preliminary work!

layout

Anyway,Β I think being able to visualize how the print looks on the pattern in 3D is really cool. There are still some limitations however. The first one is that it is not possible to match the pattern along the seams, neither automatically nor manually, as you can’t change the print placement for individual pattern pieces. The second one is that the 3D preview is only an approximation and does not reflect the exact print placement. In order to avoid print placement mishaps (let’s say a flower right on the bust apex for instance) you need to refer to the cutting layout, which is an exact rendition of what the printed fabric will look like. You can see this on the side-by-side below: the global look is the same, but the exact print placement is different between the 3D preview and the finished dress.

Sprout-comparison

 

THE FABRIC

A few days after creating my project, I received in the mail a package containing the fabric, with the outline of the pattern pieces printed in black with a thick white border.

Sprout2

I have heard wildly different opinions about Spoonflower fabric, and sometimes very negative feedback about how the colors hold up in the wash. From discussions with several Spoonflower employees, it would seem that some of the cotton fabrics might lose their colors after the first wash, but that the polyester ones are much better at keeping them. That was true for my previous Spoonflower order, a Performance PiquΓ© (polyester) which came out of the wash as bright and colorful as it was when I first received it. Apparently, cotton prints are much better now than they used to be a few years ago, but I haven’t tried them myself. To experiment with the poly crepe de chine, I cut out two swatches of the same size and washed one of them (on the right in the picture) in cold water, thenΒ put it in the dryer:

Sprout3

No sign of discoloration (the dark spot on the picture is just water, oops). As indicated on the fabric description, there was no shrinkage either. Note that forΒ other types of fabric, the estimated shrinkage is taken into account in the cutting layout.

One aspect that I appreciate with Spoonflower is knowing where the fabric comes from: everything is printed right here, in North Carolina, and with the exception of a few qualities such as the silk crepe, the base fabrics are produced in mills located in the U.S. (Spoonflower works with the Robert Kaufman mills, for instance). This poly crepe is really nice: it is very light but completely opaque in this color, and the print is bold and vibrant. The only issue I have is that it generates a lot of static: it’s not too much of a problem for a summer dress but I would avoid using it for winter clothes to wear with a sweater or tights.

 

CUTTING AND SEWING

Moving on to the most important part: cutting and sewing the project! Using a rotary cutter, it took me around thirty minutes to cut everything out. I would say that, all in all, I saved one to two hours of assembling and cutting the PDF pattern and transferring it toΒ the fabric. The pattern pieces don’t have markings to indicate their numbers, but a legend next to them that you can cut out and pin.

Sprout4

One aspect I was worried about was the pattern markings for pleats, darts, and so on. Here, the pleats were indicated by small notches on the edge of the pattern pieces. However, these notches are very tiny, and it’s easy to miss them or just cut them out accidentally if you are not careful. I actually was missing a couple for the skirt pleats – in the center front and back sides – and I had to look them up on the PDF pattern to form the pleats (the cutting layout has since been corrected to include them).

Sprout5

Cutting the fabric was a very strange experience. On one hand, I felt really relaxed not having to worry about placing pattern pieces on the straight grain, matching patterns or making sure I optimized my cutting layout enough to fit all the pieces on the fabric. This is usually my main source of stress when I sew and being on autopilot for this part was great. On the other hand, I was terrified of cutting the pieces because I felt that one slip-up of the rotary cutter would ruin the whole project, as I wouldn’t be able to re-cut any of the pieces or decide to use the rest of the fabric for something else.

In the end everything went great, both with cutting and sewing the dress. The crepe was a bit hard to handle, and it took me someΒ time to findΒ the rightΒ settings for stitch length and tension (especially on the serger) but once I had those it worked out fine. I even ended up using french seams forΒ the shoulders.

Sprout18

However, I have some reservations onΒ By Hand London’s instructions and construction methods for this dress, as was already the case for Elisalex and Flora (which I still haven’t shown you). Some of the seam allowances (bodice side seams, waist seam) are left unfinished, and the zipper instructions are confusing at best. They tell youΒ to press the facing downwards to the inside of the dress and seem to indicate to attach the zipper on both the bodice and facing, when really the facing should be left free and be hand-stitched down at the end. The facing is also not interfaced, and under-stitching it is indicated as optional, but with no interfacing or under-stitching it would really peek out on such a scooped neckline, especially in a thin and fluid fabric like this one. Anyway, none of this was blocking in making this dress, but for a beginner I can see these instructions being a problem.

Sprout12

 

THE FINISHED DRESS

Sprout8

I do likeΒ the finished dress. The pattern is definitely a good match for Sprout Patterns: the pleats in the bodice and the kimono sleeves can work with many different body shapes without adjustments.

Sprout17

I especially love the fabric: its joyful print and breeziness make the dress perfect for long summer days.

Sprout10

Unfortunately it has a major flaw: it is way too short for my taste. SinceΒ I am 5’9”, I usually lengthen the bodices and skirts of dresses I make so that the waistline hits my natural waist and the skirt is long enough for me to feel comfortable. The waistline here is okay (a bit too high but that’s alright) but despite doing a baby hem as small as I could on the skirt, I still wish I could have lengthened it.

Sprout13

 

THE ADDED VALUE

Now let’s address the elephant in the room: why would you pay more for a pre-printed pattern when you can just as well print or traceΒ it yourself? Wouldn’t you get the same thing for a lesser price buying Spoonflower fabric and a pattern separately? I did the math:

β€’ The poly crepe de chine is 52” wide, so according to the pattern you would needΒ 2,4 yards to make Zeena.
β€’ Spoonflower sells by the full yard, so that means buying 3 yards, which would come toΒ $69.
β€’ The PDF pattern for the Zeena dress (which is included in the Sprout Patterns project) costsΒ Β£9, soΒ $12.
β€’ This amounts to a $81 total if you buy the fabric and pattern separately, instead ofΒ $70Β for the Sprout Patterns project!

This may be an edge case, as the extra fabric is expensive (I would personally try to fit Zeena in 2 yards only), but we are still far from the price difference that I was expecting.

Let’s put aside the financial aspect, which is not that significant from the moment you decide to useΒ Spoonflower fabric anyway, since it is pretty expensive to begin with. What is the point of gettingΒ a pre-printed pattern? Apart from the novelty aspect, it comes down to one thing: being able to skip the tedious steps of taping together a pdf and preparing the fabric, i.e. saving time. But it comes with a price, which is not being able to adjust the pattern (length, FBA, etc.). It’s up to each sewistΒ to decide what they value the most: a quicker and easier sewing project, or a better fit.

Sprout6

 

CONCLUSION

I had a great timeΒ imagining and sewing this dress. The website that lets you experiment with patterns and print and see the result in 3D is a lot of fun, as is cutting into the pre-printed fabric. I love the finished dress, with its print that makes me smile every time and its loose yet flattering cut, even though I am still a bit uncomfortable with the short length.

That being said,Β I can’t shake the feeling that I am not really in Sprout Patterns’ target audience. I have been serious about sewing for about ten years now, and I put a lot of efforts into selecting patterns that will fit my body and adjusting them to my exact shape. I am lucky enough that I have a pretty standard morphology in my upper body and in general I don’t have to make a lot of adjustments apart from length. But I could imagine other seamstresses who would have a similar level of sewing experience and would be thrown off by the limitations of having pre-printed patterns.

In the near future, it is likely that the technology will evolve and allow for further customization and automation:Β  adjusting the pattern automatically based on a series of measurements, changing the print scale or matching it at the seams… There are only 5 people in Sprout Pattern’s team, so these things will take time, but I am really excited to see what they come up with! However, for those of us with a certain experience level in sewing, this service will always be limited compared to the infinite possibilities offered by a “manual” sewing process associated with classic on-demand fabric printing.

I can definitely see the appeal for a different audience. When I started sewing, tracing the pattern and deciding of a cutting layout was my least favorite part. I also didn’t know anything about adjusting patterns, and was just making everything as-is, using my basic bust/waist/hips measurements. Back then I would have loved to have access to something like Sprout Patterns, which would have allowed me to skip all these tedious steps while making sure that I wasn’t messing up anything while cutting my fabric.

Sprout15

Would I buy another project from Sprout Patterns?Β Probably not. Maybe if I had a largerΒ sewing budget (for now I can’t afford Spoonflower fabric on the regular) because I enjoy the time it saves, but the patterns that are offered are not really my style (I like garments that are very fitted at the waist) and the length issue is a bit of a deal-breaker.

Would I recommendΒ Sprout Patterns ?Β Yes, but not to my friends who have already been sewing for years. To them, I would recommend buying Spoonflower fabric and making a muslin in a cheap fabric before cutting into it. I would however recommend Sprout to 1) someone who has a lot of sewing money but little sewing time, or 2) someone who is starting to sew, has tried a few very simple projects first, andΒ most importantly who loves prints πŸ™‚ .

Sprout7

Sprout Patterns Dress
Zeena – By Hand London
Spoonflower Poly crepe de chine, Flamingos design by Andrea Lauren
Sent for free in exchange for a review by Sprout Patterns
Size UK 10/US 6